Cubis MSA User Manual 87
Calculation
t Enter a name for the event print e. g. “Area” (max. 6 characters).
t Define how many decimal points should be used for the results:
PQPGFKIKVU
t Enter the unit to be used for the results
(max. six characters, e.g. cm
2
)
y An overview of all settings is displayed.
t Check all settings and change as required.
y A message asks whether you would like to add another application.
y Prompts for configuring weighing and printing appear.
t Check all settings and change as required.
t Enter a short name and a description for the new task.
t To save the new task, touch 5CXG.
To Next Page
Loading...