Cubis MSA User Manual 97
Averaging
Execute Task: Averaging with Automatic Start
D t If you haven’t already done so, go to Application Management.
y The task selection is displayed.
t Touch the desired task.
or
t If the desired task is already selected, press 5VCTV.
t When you are using a variable number of measurements, enter the desired
number.
t When you are weighing live animals, place the container (cage) on the
weighing pan and tare the balance.
t Press 5VCTV to begin the task.
t Place the animal in the container.
y The measurement starts automatically, the defined number of measurements
and averaging is carried out.
y The calculated results are displayed.
t To display the average weight value, touch 4GUWNVU.
t To return to the display of the calculated value, touch %CNEWNCVG.
To Next Page
Loading...