4 Operation and Configuration
84
S84-ex/S86-ex Operator Manual
PORT NUMBER
Set the LAN port numbers, 1 to 3.
The setting range is from 00001 to 65535.
Note
• Shows only if the LAN interface is selected.
• Each port (1, 2 and 3) must be set to different values.
• The setting will be effective only when you power on the printer again.
WIRELESS MODE
Set the communication method of the wireless LAN.
The options are as follows:
•Ad Hoc
• Infrastructure
Note
• Shows only if the WLAN interface is selected.
• The setting will be effective only when you power on the printer again.
SSID
Set the SSID of the wireless LAN.
You can enter a maximum of thirty-two characters including alphabet
(upper case and lower case), numbers and symbols.
Note
• Shows only if the WLAN interface is selected.
• The setting will be effective only when you power on the printer again.
CHANNEL
Set the communication channel of the wireless LAN.
The setting range is from 01 to 13 and the default value is 06.
Note
• Shows only if the WLAN interface is selected.
• The setting will be effective only when you power on the printer again.
• When the channel has become invalid due to a region code change,
the channel returns to its default setting.
To Next Page
Loading...
