Scanivalve MPS4232 - Calibration Version; Flash Directory Contents; Delete File; Load Configuration File

40
MPS4232
Section 5: Software

COMMAND CALVER
TYPE Get
DESCRIPTION Retrieves the soware version of the MPS used during the last saved calibraon.
SYNTAX CALVER
RETURNS The version string followed by the prompt when ready to accept a new command.
EXAMPLE CALVER
1.08
>

COMMAND DIR
TYPE Get
DESCRIPTION Returns the les saved on the ash memory, including the total size (bytes).
SYNTAX DIR
RETURNS Prompt when ready to accept a new command.
EXAMPLE DIR
lename
v100.mps
scan.cfg
ip.cfg
Cal_1.cfg
>
size
942080
122
89
11336

COMMAND DELFILE
TYPE Funcon
DESCRIPTION Deletes a selected le from ash memory.
SYNTAX DELETE <lename>
Where <lename> is the name of the le on the ash, including the extension.
RETURNS Prompt when ready to accept a new command.
EXAMPLE DELETE FILE scan.cfg
>

COMMAND LOAD
TYPE Funcon
DESCRIPTION Commands the MPS to load sengs stored in a le on the ash to RAM.
SYNTAX LOAD <lename>
Where <lename> is the name of the le, including the extension. The le must be a congura-
on le.
RETURNS Prompt when ready to accept a new command.