Scanivalve MPS4232 - Multicast Commands; Multiple Unit Find; Multiple Unit Stop; Multiple Unit Scan

69
MPS4232
Section 5: Software


COMMAND MFIND
TYPE Funcon
DESCRIPTION Lists all of the MPS4232 devices in the mulcast cluster of the master.
SYNTAX MFIND
RETURNS A list of MPS modules found in the mulcast “cluster” followed by a prompt ready for the next
command.
EXAMPLE MFIND
Found device SN9 IP Address 191.30.90.9
Found device SN10 Address 191.30.90.10

COMMAND MSTOP
TYPE Funcon
DESCRIPTION Sent to stop mulple units when working with mulple devices. When the master receives the
MSTOP command it issues a STOP command to the mulcast address set in the MCAST variable.
Each MPS member of this mulcast cluster will stop scanning.
SYNTAX MSTOP
RETURNS Prompt ready for the next command.
EXAMPLE MSTOP
>

COMMAND MSCAN
TYPE Funcon
DESCRIPTION When the master receives the MSCAN command it issues a SCAN command to the mulcast
address set in the MCAST variable. Each MPS member of this mulcast cluster will start scanning
provided the SSD and SST condions are met.
SYNTAX MSCAN
RETURNS Scan Data. The prompt will appear aer the scan is stopped.
EXAMPLE MSCAN
>
NOTES Output is based on formang.