Scanivalve MPS4232 - FTP Variables (LIST FTP); LIST FTP Settings (LIST FTP); Set User Name (USERFTP); Set FTP Password (PASSFTP)

56
MPS4232
Section 5: Software

The FTP sengs are used to control the MPS4200 FTP client connecon to the FTP server, which is enabled by the ENFTP
variable under LIST S.

DESCRIPTION Returns all of the FTP sengs
SYNTAX LIST FTP
RETURNS All of the FTP seng followed by the prompt.
EXAMPLE LIST FTP
SET USERFTP Scanivalve
SET PASSFTP password
SET PATHFTP /File
SET IPFTP 10.0.1.222
SET FILEFTP Scan
>

COMMAND USERFTP
TYPE Set/Get
DESCRIPTION Sets the name of the user login on the FTP server or NAS
SYNTAX SET USERFTP <user name>
RETURNS Prompt when ready to accept a new command
EXAMPLE SET USERFTP Scanivalve
>
DEFAULT admin

COMMAND PASSFTP
TYPE Set/Get
DESCRIPTION Sets the name of the user password for login on the FTP server or NAS
SYNTAX SET PASSFTP <password>
RETURNS Prompt when ready to accept a new command
EXAMPLE SET PASSFTP password
>
DEFAULT password

COMMAND PATHFTP
TYPE Set/Get
DESCRIPTION Set the directory path of the scan data le on the user’s computer. The argument does not require
the use of a drive leer e.g., C: or D:.
SYNTAX SET PATHFTP <directory path>
The <directory path> must start with a “/”.
RETURNS Prompt when ready to accept a new command