Scanivalve MPS4232 - Trademarks and Copyrights; Packaging for Shipment; Important Notice; Contact Information

v
MPS4232
Section 1: Introduction
v
MPS4232
Preface
BY OPERATION OF LAW OR OTHERWISE, INCLUDING THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, AND IN NO EVENT SHALL
SELLER BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES.
In the event of a failure:
1) Nofy Scanivalve Corporaon, Customer Service
De partment. Include model number and serial number.
On receipt of this informaon, service data or shipping
instrucons will be forwarded. This may be transacted by
telephone or e-mail.
2) On receipt of shipping instrucons, forward the
pro duct, transportaon prepaid. Repairs will be made and
the product returned.
3) All shipments should be made via “Best
Way.” The product should be shipped in the original
packing container or wrapped in protecve material and
surrounded by a minimum of four (4) inches of a shock
absorbing material.

Scanivalve is a registered trademark of Scanivalve Corpora-
on.
LabVIEW® is a registered trademark of Naonal Instru-
ments.
All other brand and product names are trademarks or regis-
tered trademarks of their respecve companies.

If the product must be shipped, whether being returned
to Scanivalve or relocated to another locaon, it must be
packaged properly to minimize the risk of damage. The
recommended method of packing is to place the instru-
ment in a container, surrounded on all sides with at lease
four inches of shock aenuang material such as Styrofoam
peanuts.

Please note that the product specicaons and other
informaon contained in this manual are subject to change
without noce. Scanivalve Corporaon makes an eort and
strives to provide complete and current informaon for the
proper use of the equipment. If there are any quesons
regarding this manual or the proper use of the equipment,
contact Scanivalve Corporaon.

If there are any quesons or concerns regarding any Scani-
valve product, please do not hesitate to contact us at the
following:
Scanivalve Corp.
1722 N. Madson Street
Liberty Lake, WA 99019
Telephone: (800)935-5151 (509)891-9970
Fax: (509)891-9481
scanco@scanivalve.com
www.scanivalve.com
Scanivalve Corporaon is an ISO 9001:2015 cered
company.