Scanivalve MPS4232 - Reboot; Format Flash; Read Current Temperature

43
MPS4232
Section 5: Software
COMMAND STOP
TYPE Funcon
DESCRIPTION Cancels all commands or rounes and returns the MPS to READY mode.
SYNTAX STOP or <ESC>
RETURNS Prompt when ready to accept a new command.
EXAMPLE STOP
>
NOTES This command is accepted at all mes.

COMMAND REBOOT
TYPE Funcon
DESCRIPTION Reboots the MPS (so reboot).
SYNTAX REBOOT
RETURNS Nothing.
EXAMPLE REBOOT

COMMAND FDISK
TYPE Funcon
DESCRIPTION Erases and formats the internal memory.
WARNING: All data will be lost, including conguraon les.
Once the command is issued, the MPS will respond with a conrmaon message to approve the
FDISK command or to cancel.
SYNTAX FDISK
RETURNS Type FDISKCONFIRM to conrm FDISK or STOP to escape FDISK Formang…
Prompt when ready for next command.
EXAMPLE FDISK
Type FDISKCONFIRM to conrm FDISK or STOP to escape FDISK Formang…
>
NOTES FDISK will not remove the installed rmware applicaon.
NOTES FSIDKCONFIRM will trigger a Format Completed! message.

COMMAND TREAD
TYPE Get
DESCRIPTION Returns the current internal RTD temperatures.
SYNTAX TREAD [<channel>]
Where channel is a temperature channel number from 1 to 8. When omied all temperature
channels are returned.
RETURNS Temperature of the internal RTDs
EXAMPLE TREAD
32.687500,32.375000,32.500000,32.437500
>