Scanivalve MPS4232 - Set FTP IP Address (IPFTP); Set FTP File Name (FILEFTP)

57
MPS4232
Section 5: Software
EXAMPLE SET PATHFTP /disk1/share
>
DEFAULT /disk1/share

COMMAND IPFTP
TYPE Set/Get
DESCRIPTION Set the IP address of the users FTP server.
SYNTAX SET IPFTP <IP Address>
RETURNS Prompt when ready to accept a new command
EXAMPLE SET IPFTP 10.0.1.222
>
DEFAULT 10.0.0.1

COMMAND FILEFTP
TYPE Set/Get
DESCRIPTION Set the base name for the scan data on the user’s computer. The actual le name will have the
me and date appended to the le. It will have a le extension based on the data format.
SYNTAX SET FILEFTP scan
RETURNS Prompt when ready to accept a new command
EXAMPLE SET FILEFTP Scan_117_
>
DEFAULT SCAN