The VLAN interface can be used to monitor OTT traffic – also if it is associated with the management
interface. Multicasts can be joined from any of the VLANs, as long as the VLAN belongs to one of the
two physical data interfaces. The VLAN interfaces are not available for serving the web interfaces.
Edit VLANs
Enable: Once enabled the virtual interfaces are created and available.
Interface: The physical interface to associate the VLAN with.
VLAN id: The VLAN id (1-4095)
IP address: The IP address of the interface.
Netmask: The Netmask of the interface.
Gateway: The Gateway of the interface.
Description: A user given description of the interface.
Note that editing VLANs should not require a reboot to take effect.
6.17.7 Setup — VBC
The VideoBRIDGE Controller can automatically detect the Probe and add it to the VBC equipment
list, provided that the auto-detect functionality is enabled and the VBC server address is known to the
VB220. Note that the network must be transparent to traffic between the VBC server and Probes for
auto-detection to work.
The VBC server’s host name may be typed in the VBC server address field. The IP address associated
with the DNS name will be displayed. If host name lookup fails, it is necessary to type the VBC server’s
IP address. Host name lookup is only performed if auto-detect is enabled.
When changes have been made in the
Setup — VBC
view, click the
Apply
button for changes to take
effect.
232 VB2xx GigE User’s Manual version 5.4
To Next Page
Loading...
Need help?
General
