To Next Page

To Previous Page

Service checks: Service check error Default: Enabled,

severity Major

MIP: Megaframe Insertion Packet error Default: Enabled,

severity Major

Content:

Content check error (checking of au-

dio and video)

Default: Enabled,

severity Major

Reference:

Reference check error (comparing

the stream with a Gold TS)

Default: Enabled,

severity Major

Gold TS:

Error found while comparing the

stream with the stored Gold TS

snapshot)

Default: Enabled,

severity Major

Pre FEC BER:

Bit error rate prior to Viterbi FEC

above speciﬁed threshold (Applica-

ble for RF inputs)

Default: Enabled,

severity Major

Post FEC BER:

Bit error rate after Viterbi FEC

above speciﬁed threshold (Applica-

ble for RF inputs)

Default: Enabled,

severity Major

MER:

Modulation Error Ratio above speci-

ﬁed threshold (Applicable for RF in-

puts)

Default: Enabled,

severity Major

SNR:

Signal to Noise Ratio below speci-

ﬁed threshold (Applicable for RF in-

puts)

Default: Enabled,

severity Major

Signal strength:

Signal strength outside speciﬁed

thresholds (Applicable for RF in-

puts)

Default: Enabled,

severity Major

SFN meas:

Error with timing in DVB-T/T2 SFN

networks (ASI and DVB-T/DVB-T2

inputs)

Default: Enabled,

severity Major

Packet error count:

Detection of one or more packets

with errors after demodulator FEC

(VB272)

Default: Enabled,

severity Major

Center frequency:

Difference between received and

conﬁgured RF frequency exceeds

speciﬁed threshold (VB252, VB262

and VB272)

Default: Enabled,

severity Major

Symbol rate:

Difference between received and

conﬁgured symbol rate exceeds

speciﬁed threshold (VB252, VB262

and VB272)

Default: Enabled,

severity Major

VB2xx GigE User’s Manual version 5.4 59

Brand	Sencore
Model	VB200-DC
Category	Network Hardware
Language	English

Sencore VB200-DC User Manual

Table of Contents

Questions and Answers:

Sencore VB200-DC Specifications

Related product manuals