Sharp CR4 Cloud Series User Manual

2-35
COPIER►BASIC PROCEDURE FOR MAKING COPIES
Specifying the orientation and size of a non-standard size originals
1
Tap the [Original] key to set the orientation of the original.
► COPY MODE (page 2-3)
2
Tap the [Detail] key to change to normal mode.
► Changing mode from each mode (page 2-5)
3
Tap the [Original] key.
4
Tap the [Direct Entry] tab.
5
Specify the original size.
• Tap the areas displaying width and height sizes respectively, and enter the sizes using the numeric keys.
• It is convenient to use to finely adjust the entered size.
6
Tap the [OK] key.
On the base screen, check that the specified size is displayed on the [Original] key.
After the settings are completed, tap .
Preview
Start
Original
Others
Auto
Direct EntryInchAB Custom Size
No. of copies
Skip Blank Page in Original
Copy Ratio
Enlarge/Reduce Copy
Blank Page Skip
Background Adjustment
2-Sided Copy
Colour Mode
Colour
Start
A4
294
432
(25 ~ 297)
mm
(25 ~ 432)
mm
X
Y
OK
1
CA
B/W
Image Orientation

Sharp CR4 Cloud Series Specifications

General

Brand	Sharp
Model	CR4 Cloud Series
Category	All in One Printer
Language	English