3-93
PRINTERâ–ºAPPENDIX
SPECIFYING A BILLING CODE USING THE
PRINTER DRIVER
You can enter a billing code using the printer of the machine.
For an overview of a billing code, refer to "BILLING CODE
(page 1-40)".
Enable billing code
This setting is required only in the Windows environment. (Always usable under Mac OS environment)
With the MX-2630N, the printer driver cannot be used in Windows Vista.
1
Right-click the [Start] button and select [Control Panel].
• In Windows Vista, click the [Start] button, then select [Control Panel] - [Printers].
• In Windows 7, click the [Start] button, select [Devices and Printers], right-click the printer driver icon of the machine,
and click [Printer Properties].
2
Click [View devices and printers] in [Hardware and Sound].
In Windows Vista, click the printer driver icon of the machine.
3
Click [Printer Properties].
In Windows Vista, click the [Organize] menu, then click [Properties].
4
Specify a billing code
(1) Click the [Configuration] tab.
(2) Click the [Printing Policy] button.
(3) Set the [Billing Code] check box to ,
(4) Click the [OK] button.
To Next Page
Loading...
Need help?
General
