Sharp CR4 Cloud Series User Manual

2-42
COPIER►BASIC PROCEDURE FOR MAKING COPIES
STAPLE SETTINGS
Specify whether or not the set of output will be stapled.
Original
Orientation
Staple
Staple Position
Left Top Right
- OFF Does not staple.
Portrait orientation
1 Staples
2 Staples
Stapleless Staple
Landscape orientation
1 Staples
2 Staples
Stapleless Staple
• You can view staple positions on the "PREVIEW SCREEN (page 1-17)". Text will be printed at the preset size regardless
of the copy ratio or paper size setting.
• To change the default staple position:
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Initial Status Settings] → [Staple Position].
• An inner finisher, finisher, finisher (large stacker), saddle stitch finisher or saddle stitch finisher (large stacker) is required to
use the staple function.
• A saddle stitch finisher or saddle stitch finisher (large stacker) is required to use the saddle stitch function.
• An inner finisher, finisher (large stacker) or saddle stitch finisher (large stacker) is required to use the stapleless staple.

Sharp CR4 Cloud Series Specifications

General

Brand	Sharp
Model	CR4 Cloud Series
Category	All in One Printer
Language	English