5-101
SCANNER/INTERNET FAXâ–ºOTHER FUNCTIONS
ADJUSTING RED/GREEN/BLUE (RGB Adjust)
This function heightens or lightens any one of the three colour components R (red), G (green), and B (blue).
1
Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
â–º AUTOMATIC DOCUMENT FEEDER (page 1-82)
â–º DOCUMENT GLASS (page 1-84)
2
Tap the mode display to switch to the initial screen of each mode.
â–º Changing mode from each mode (page 5-10)
3
Specify the destination.
â–º RETRIEVING A DESTINATION FROM AN ADDRESS BOOK (page 5-16)
â–º VIEWING A LIST OF THE SELECTED DESTINATIONS (page 5-19)
â–º USING A SEARCH NUMBER TO RETRIEVE A DESTINATION (page 5-20)
â–º ENTERING AN ADDRESS MANUALLY (page 5-21)
â–º SPECIFYING A NETWORK FOLDER (page 5-22)
â–º RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK (page 5-23)
â–º USING A TRANSMISSION LOG TO RESEND (page 5-25)
4
Tap the [Others] key, and tap the [RGB Adjust] key.
5
Tap of the colour you want to
adjust or slide the slider to adjust the
colouring.
After the settings are completed, tap and [Back] keys in
sequence.
To cancel the RGB Adjust setting:
Tap the [Off] key.
R (Red)+
G (Green)+
B (Blue)+
Preview
Start
Back
Others
CA
Colour Mode
RGB Adjust
This setting is only applied to colour jobs.
Off
On
Specify Send Exposure
Exposure
-2
-1 0 21
-2
-1 0 21
-2
-1 0 21
R
G
B
Touch [+] to darken and [-] to lighten
selected colour tone.
To Next Page
Loading...
Need help?
General
