2-46
COPIERâ–ºBASIC PROCEDURE FOR MAKING COPIES
1
Tap the [Staple / Punch] key.
â–º COPY MODE (page 2-3)
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
â–º Specifying the orientation of the original (page 2-33)
2
Select punching and set the position.
After the settings are completed, tap .
In normal mode
• You can select the offset output checkbox to have each set of output be offset from the previous set to enable
easy removal from the output tray.
• To change the output tray, tap the [Output Tray] key, and select the output destination.
To Next Page
Loading...
Need help?
General
