5-151
SCANNER/INTERNET FAXâ–ºSCANNING FROM A COMPUTER (PC Scan Mode)
7
Select scanning settings while viewing
the image.
[Rotate] button:
Each time this button is clicked, the preview image rotates
90 degrees. This lets you change the orientation of the
image without picking up and placing the original again. The
image file will be created using the orientation that appears
in the preview window.
[Image Size] button:
Click this button to specify the scan area by entering
numerical values. Pixels, mm, or inches can be selected for
the units of the numerical values. If a scanning area has
already been specified, the entered numbers will change the
area relative to the top left corner of the specified area.
button:
When a preview image is displayed and a scanning area is
not specified, you can click the button to automatically set
the scanning area to the entire preview image.
• For further information on the scan settings, click button to open scanner driver Help.
• If the originals are placed in the document feeder tray, only the top page will be previewed. The top page will be
delivered to the original exit tray. Be sure to return the previewed page to the document feeder tray before previewing
again or scanning.
8
Click the [Scanning] button.
Scanning begins. The image appears in your application.
Assign a file name to the scanned image and save it as
appropriate in the software application you are using.
To Next Page
Loading...
Need help?
General
