1-70
BEFORE USING THE MACHINEâ–ºLOADING PAPER
Loading paper in the SRA3
When loading paper in the SRA3, follow the steps below to move the control plate auxiliary block.
4
Insert the paper into the tray.
Load the paper with the print side facing up. The stack must
not be higher than the indicator line (maximum of 550
sheets).
5
Gently push the paper tray into the
machine.
Push the tray firmly all the way into the machine slowly.
Forcefully inserting the paper may cause skewed feeding
and paper misfeeds.
1
Remove the control plate auxiliary
block.
2
Attach the control plate auxiliary block
that was removed in step 1.
Control plate
auxiliary block
To Next Page
Loading...
Need help?
General
