Sharp MX-2314N Service Manual

MX-3114N SIMULATION 6 – 8
67 17 Printer reset Printer
24 Printer color balance adjustment (Auto adjustment) Printer
25 Printer color balance adjustment (Manual adjustment) Printer
26 Used to set the target color balance of the printer mode auto color balance adjustment. Printer
27 Used to set the service target of the printer mode auto color balance adjustment. Printer
28 Used to set the default of the service target of the printer mode auto color balance adjustment. Printer
31 Used to clear the printer calibration value. Printer
33 Used to change the gamma of the printer screen. Printer
34 Used to set the density correction in the printer high density section. (Support for the high density section
tone gap)
Printer
36 Used to adjust the density in the low density section. Printer
41 Used to set the threshold value for the printing judgement in the black color of the black and white printing
or the selected color.
Printer
42 Used to change the gradation by increasing or decreasing the amount of the black color in the black and
white printing or the selected color.
Printer
43 Used to adjust the color balance of the black and white printing finely. Printer
45 Used to adjust the printer image filter and trapping. Printer
52 Used to set the default of the gamma of the printer screen. Printer
54 Printer color balance adjustment (Automatic adjustment for each dither ) Printer
Main Sub Functions Section

Sharp MX-2314N Specifications

General

Print Technology	Laser
Print Speed	23 ppm
Print Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Copy Speed	23 cpm
Copy Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Duplex Printing	Yes
Connectivity	USB, Ethernet
Functions	Print, Copy, Scan, Fax
Paper Size	A3, A4, A5, B4, B5
Max Paper Size	A3
Original Size	A3