Sharp MX-2314N - RSPF Section

MX-3114N MAINTENANCE 9 – 17
A. RSPF section
23 cpm machine
26 cpm/31 cpm machine
Unit name
Parts work
sequence
Part name
When
calling
100
K
200
K
300
K
400
K
500
K
600
K
700
K
800
K
Remark
RSPF unit 1 Document pickup roller Replace at 100K of the
SPF paper feed counter or
1 year of use.
When replacing the paper
feed roller, apply grease to
the paper feed shaft.
GP-501MR
2 Paper feed roller 
3 Separation roller 
4 Torque limiter SPF ✕✕✕✕✕✕✕✕✕Replace at 400K of the
SPF paper feed counter or
2 years of use.
5 Take-up torque limiter ✕✕✕✕✕✕✕✕✕
6 Discharge brush ✕✕✕✕✕✕✕✕✕
7 Registration roller 
8 Transport roller 2 
9 Transport roller 3 
10 Paper exit roller 
11 Sensors ✕✕✕✕✕✕✕✕✕
12 Scan plate 
13 Gears ✕✕✕✕✕✕✕✕✕
14 Belts ✕✕✕✕✕✕✕✕✕
15 OC mat  
Unit name
Parts work
sequence
Part name
When
calling
200
K
300
K
400
K
600
K
800
K
900
K
1000
K
1200
K
Remark
RSPF unit 1 Document pickup roller –  – Replace at 100K of the
SPF paper feed counter or
1 year of use.
When replacing the paper
feed roller, apply grease to
the paper feed shaft.
GP-501MR
2 Paper feed roller –  – 
3 Separation roller –  –

4 Torque limiter SPF ✕✕– ✕✕✕ – ✕✕Replace at 400K of the
SPF paper feed counter or
2 years of use.
5 Take-up torque limiter ✕✕– ✕✕✕ – ✕✕
6 Discharge brush ✕✕– ✕✕✕ – ✕✕
7 Registration roller –  – 
8 Transport roller 2 –  – 
9 Transport roller 3 –  – 
10 Paper exit roller –  – 
11 Sensors ✕✕– ✕✕✕ – ✕✕
12 Scan plate –  – 
13 Gears ✕✕– ✕✕✕ – ✕✕
14 Belts ✕✕– ✕✕✕ – ✕✕
15 OC mat –  – 
g Check (Clean, replace, or adjust according to necessity.) Ũ : Clean
Ţ : Replace : Lubricateţ : Adjust ŭ