Sharp MX-2314N - Page 168

MX-3114N SIMULATION 6 – 35
26-69
Purpose
Setting
Function (Purpose)
Used to set the operating conditions for
toner near end.
Section
Operation/Procedure
1) Select an item to be set with scroll keys.
2) Enter the set value with 10-key.
3) Press [OK] key.
The set value in step 2 is saved.
Item E (TONER END COUNT) setting value and printable quan-
tity
<List of Default values and set values for each destination>
Item/Display Content
Setting
range
Default
value
ATONER
PREPARATION
(0:YES 1:NO)
0 The toner
preparation
message is
displayed.
0 - 1 List of
Default
values and
set values
for each
destination
1 The toner
preparation
message is not
displayed.
B REMAINING
TONER
LEVEL
0.05 0 Toner
preparation at
remaining toner
level of 5%
0 - 9
0.1 1 Toner
preparation at
remaining toner
level of 10%
0.15 2 Toner
preparation at
remaining toner
level of 15%
0.2 3 Toner
preparation at
remaining toner
level of 20%
0.25 4 Toner
preparation at
remaining toner
level of 25%
0.3 5 Toner
preparation at
remaining toner
level of 30%
0.35 6 Toner
preparation at
remaining toner
level of 35%
0.4 7 Toner
preparation at
remaining toner
level of 40%
0.45 8 Toner
preparation at
remaining toner
level of 45%
0.5 9 Toner
preparation at
remaining toner
level of 50%
C TONER NEAR
END (0:YES 1:NO)
0 The toner near
end message is
displayed.
0 - 1
1 The toner near
end message is
not displayed.
D TONER END 1 Operation setup
1
1 - 3
2 Operation setup
2
3 Operation setup
3
E TONER END
COUNT
Setting of the
number of copy/
print/FAX outputs
Enable after TONER
NEAR END.
1 - 3 1
F TONER E-MAIL
ALERT
0 Low status
send of E-mail
alert (When the
toner
preparation
message is
displayed) (in
near near toner
end)
0 - 1 1
1 Low status
send of E-mail
alert (near toner
end)
Setting value Printable quantity at A4/5% equivalent conversion
10
225
350
Destination
Setting value
Toner
preparation
message
Toner
preparation
time
Toner near
end
message
Enable/
Disable of
print job
continuation
at toner end
U.S.A 0
(Displayed)
4 (Displayed
when the
toner
remaining
quantity is
25%.)
0
(Displayed)
2
(Print
operation
stopped)
CANADA 0
(Displayed)
4 (Displayed
when the
toner
remaining
quantity is
25%.)
0
(Displayed)
INCH 0
(Displayed)
4 (Displayed
when the
toner
remaining
quantity is
25%.)
0
(Displayed)
JAPAN 0
(Displayed)
4 (Displayed
when the
toner
remaining
quantity is
25%.)
1 (Not
Displayed)
AB_B 0
(Displayed)
4 (Displayed
when the
toner
remaining
quantity is
25%.)
0
(Displayed)
Item/Display Content
Setting
range
Default
value