Sharp MX-2314N - Page 174

MX-3114N SIMULATION 6 – 41
27-14
Purpose
Setting
Function (Purpose)
Used to set the FSS function connection
test mode.
Section
Operation/Procedure
1) Enter the set value with 10-key.
2) Press [OK] key.
The set value in step 1) is saved.
27-15
Purpose
Operation test/check
Function (Purpose)
Used to display the FSS connection status.
Section
Operation/Procedure
The FSS operating status is displayed.
27-16
Purpose
Setting
Function (Purpose)
Used to set the FSS alert send.
Section
Operation/Procedure
1) Enter the set value with 10-key.
The value for the FSS alert operation specification is set.
2) Press [OK] key.
RSPF FEED TIME1 (SPF) History of paper transport time between SPF
sensors 1
Year/month/day
hour: min.: sec.
5 digits 5 digits (ms) 5 digits (ms)
FEED TIME2 (SPF) History of paper transport time between SPF
sensors 2
Year/month/day
hour: min.: sec.
5 digits 5 digits (ms) 5 digits (ms)
FEED TIME3 (SPF) History of paper transport time between SPF
sensors 3
Year/month/day
hour: min.: sec.
5 digits 5 digits (ms) 5 digits (ms)
FEED TIME4 (SPF) History of paper transport time between SPF
sensors 4
Year/month/day
hour: min.: sec.
5 digits 5 digits (ms) 5 digits (ms)
FEED TIME5 (SPF) History of paper transport time between SPF
sensors 5
Year/month/day
hour: min.: sec.
5 digits 5 digits (ms) 5 digits (ms)
FEED TIME6 (SPF) History of paper transport time between SPF
sensors 6
Year/month/day
hour: min.: sec.
5 digits 5 digits (ms) 5 digits (ms)
FEED TIME7 (SPF) History of paper transport time between SPF
sensors 7
Year/month/day
hour: min.: sec.
5 digits 5 digits (ms) 5 digits (ms)
FEED TIME8 (SPF) History of paper transport time between SPF
sensors 8
Year/month/day
hour: min.: sec.
5 digits 5 digits (ms) 5 digits (ms)
FEED TIME9 (SPF) History of paper transport time between SPF
sensors 9
Year/month/day
hour: min.: sec.
5 digits 5 digits (ms) 5 digits (ms)
FEED TIME10 (SPF) History of paper transport time between SPF
sensors 10
Year/month/day
hour: min.: sec.
5 digits 5 digits (ms) 5 digits (ms)
Item/Display Content Occurrence date
Code between
sensors
Passing time
Reference
passing time
0 Disable (Default)
1 Enable
Item/Display Content Setting range
Default
value
FSS CONNECTION Used to display the
FSS connection
status.
0Not
operated
0
1Operated
Item/Display Content
Setting
range
Default
value
A MAINTENAN
CE ALERT
(0:YES 1:NO)
Maintenance
alert send
Enable setting
Alert send
Enable
00
Alert send
Disable
1
BTONER
ORDER
ALERT
(0:YES 1:NO)
Toner order
alert send
Enable setting
Alert send
Enable
00
Alert send
Disable
1
CTONER
CTRG ALERT
(0:YES 1:NO)
Ton er
cartridge
replacement
alert send
Enable setting
Alert send
Enable
00
Alert send
Disable
1
D JAM ALERT
(0:YES 1:NO)
Continuous
JAM alert
send Enable
setting
Alert send
Enable
00
Alert send
Disable
1
ETROUBLE
ALERT
(0:YES 1:NO)
Trouble alert
send Enable
setting
Alert send
Enable
00
Alert send
Disable
1
F PAPER
ORDER
ALERT
(0:YES 1:NO)
Paper order
alert send
Enable setting
Alert send
Enable
00
Alert send
Disable
1