MX-3114N SIMULATION 6 – 71
46-32
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the document background
density reproducibility in the monochrome
auto copy mode.
Section
Operation/Procedure
1) Select a target item of setting with scroll key on the touch
panel.
2) Enter the set value with 10-key.
3) Press [OK] key. (The set value is saved.)
When the adjustment value is increased, reproducibility of the
background and the low density image is increased. When the
adjustment value is decreased, reproducibility of the background
and the low density image is decreased.
[RSPF]
46-36
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the colors in the 2-color
copy mode.
Section
Operation/Procedure
1) Select a target adjustment item with scroll key on the touch
panel.
2) Enter the set value with 10-key.
3) Press [OK] key. (The set value is saved.)
By changing the density level of each color, the color adjustment in
the 2-color copy mode can be performed.
Item/Display Content
Setting
range
Default
value
A COPY : OC Copy mode (for OC) 1 - 250 196
B COPY : RSPF Copy mode (for RSPF) 1 - 250 196
C SCAN : OC Scanner mode (for OC) 1 - 250 196
D SCAN : RSPF Scanner mode (for RSPF) 1 - 250 196
E FAX : OC FAX mode (for OC) 1 - 250 196
F FAX : RSPF FAX mode (for RSPF) 1 - 250 196
Item/Display Content
Setting
range
Default value Default
value
CMY
OUTCOLOR
(Output color coefficient)
A RED R output color 0 - 255 0 255 200 -
B GREEN G output color 0 - 255 255 0 255 -
C BLUE B output color 0 - 255 255 150 0 -
D CYAN C output color 0 - 255 255 0 0 -
E MAGENTA M output color 0 - 255 0 255 0 -
F YELLOW Y output color 0 - 255 0 0 255 -
CHROMA
(Chroma adjustment)
A RED / BLACK Red extraction mode
(The red recognition area is adjusted.)
0 - 6 - - - 3
B KS:CHROMATIC Chromatic color extraction mode
(The chromatic color recognition area is adjusted.)
0 - 6 - - - 3
To Next Page
Loading...
