Sharp MX-2314N - Page 206

MX-3114N SIMULATION 6 – 73
46-39
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the sharpness of FAX send
images.
Section
Operation/Procedure
1) Select a target item with scroll keys on the touch panel.
2) Enter the set value with 10-key.
3) Press [OK] key. (The set value is saved.)
Input small numeric value to obtain crispy image. Input large
numeric value to decrease moire.
46-40
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the FAX send image density.
(Collective adjustment of all the modes)
Section
Operation/Procedure
1) Set the document on the document table.
2) Enter the set value with 10-key.
3) Press [EXECUTE] key, or [OK] key
When [EXECUTE] key is pressed, the adjustment value is set
and the scanned document image is outputted.
46-41
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the FAX send image density.
(Normal)
Section
Operation/Procedure
1) Set the document on the document table.
2) Enter the set value with 10-key.
3) Press [EXECUTE] key, or [OK] key
When [EXECUTE] key is pressed, the adjustment value is set
and the scanned document image is outputted.
To check the adjustment density level of items A - F, set the docu-
ment and set the setting value of item G according to items A - F,
and press [EXECUTE] key.
AUTO AUTO3 (-) LUT2 Auto mode
judgment 3
NORMAL
(-) LUT1
NOMAL
(+) LUT1
(+) LUT2
AUTO4 (-) LUT2 Auto mode
judgment 4
NORMAL
(-) LUT1
NOMAL
(+) LUT1
(+) LUT2
AUTO5 (-) LUT2 Auto mode
judgment 5
NORMAL
(-) LUT1
NOMAL
(+) LUT1
(+) LUT2
AUTO6 (-) LUT2 Auto mode
judgment 6
NORMAL
(-) LUT1
NOMAL
(+) LUT1
(+) LUT2
Item/Display Content
Setting
range
Default
value
A 200 x 100 [DPI] OFF 200 x 100 [DPI]
halftone OFF
0 - 2 1
B 200 x 200 [DPI] OFF 200 x 200 [DPI]
halftone OFF
0 - 2 1
C 200 x 200 [DPI] ON 200 x 200 [DPI]
halftone ON
0 - 2 1
D 200 x 400 [DPI] OFF 200 x 400 [DPI]
halftone OFF
0 - 2 1
E 200 x 400 [DPI] ON 200 x 400 [DPI]
halftone ON
0 - 2 1
F 400 x 400 [DPI] OFF 400 x 400[DPI]
halftone OFF
0 - 2 1
G 400 x 400 [DPI] ON 400 x 400[DPI]
halftone ON
0 - 2 1
H 600 x 600 [DPI] OFF 600 x 600[DPI]
halftone OFF
0 - 2 1
I 600 x 600 [DPI] ON 600 x 600[DPI]
halftone ON
0 - 2 1
Item/Display
(Copy mode)
Select
button
Content
Default
value
Item/Display Content
Setting
range
Default
value
A EXPOSURE
LEVEL(ALL)
Used to adjust the FAX send
image density. (Collective
adjustment of all the modes)
1 - 99 50
Item/Display Content
Setting
range
Default
value
A AUTO Auto 1 - 99 50
B EXPOSURE1 Exposure 1 1 - 99 50
C EXPOSURE2 Exposure 2 1 - 99 50
D EXPOSURE3 Exposure 3 1 - 99 50
E EXPOSURE4 Exposure 4 1 - 99 50
F EXPOSURE5 Exposure 5 1 - 99 50
G EXECUTE
MODE
AUTO Print
mode
Auto 1 - 6 1 1
(AUTO)
EXP1 Exposure 1 2
EXP2 Exposure 2 3
EXP3 Exposure 3 4
EXP4 Exposure 4 5
EXP5 Exposure 5 6