MX-3114N SIMULATION 6 – 81
46-61
Purpose
Adjustment/Setup
Function (Purpose)
Used to adjust the area separation recogni-
tion level.
Section
Operation/Procedure
1) Select an adjustment mode.
2) Select a target adjustment item with scroll key on the touch
panel.
3) Enter the adjustment value using the 10-key.
4) Press [OK] key.
This must be set to the default unless any change is specially
required.
When the adjustment value is set to a value greatly different from
the default value, image quality trouble may occur for some docu-
ments.
46-62
Purpose
Adjustment/Setup
Function (Purpose)
Used to set the operating conditions of the
ACS, the area separation, the background
image process, and the auto exposure
mode.
Section
Operation/Procedure
1) Select a target adjustment item with scroll key on the touch
panel.
2) Enter the adjustment value using the 10-key.
3) Press [OK] key.
This must be set to the default unless any change is specially
required.
When the adjustment value is set to a value greatly different from
the default value, image quality trouble may occur for some docu-
ments.
Item/Display Content
COLOR AUTO [Color/Gray] Auto
TPP [Color/Gray] Manual (Text print)
COPY(TPP) [Color/Gray] Copy document (Text print)
MONO AUTO [Monochrome] Auto
TPP [Monochrome] Manual (Text print)
COPY(TPP) [Monochrome] Copy document (Text
print)
Item/Display Content
Setting
range
Default
value
A SEGMENT: SWITCH
[TXT ON SCR]
Detection ON/OFF:
Text on dot
0 - 1 0
B SEGMENT: SWITCH
[LINE SCR]
Detection ON/OFF:
line screen
0 - 1 0
C SEGMENT: SWITCH
[SMALL SCR]
Detection ON/OFF:
Dot in a small area
0 - 1 0
D SEGMENT: SWITCH
[HIGH LPI]
Detection ON/OFF:
High line number
judgment select
0 - 1 0
E SEGMENT: SWITCH
[TXT ON SCR IMAGE
SEND]
Detection ON/OFF:
Text on image send
dots
0 - 1 0
F SEGMENT: ADJUST
[BK TXT 1]
Detection level
adjustment: Black text
1
1 - 99 50
G SEGMENT: ADJUST
[CL TXT 1]
Detection level
adjustment: Color text
1
1 - 99 50
H SEGMENT: ADJUST
[BK TXT 2, CL TXT 2]
Detection level
adjustment: Black text
2, Color text 2
1 - 49 25
I SEGMENT: ADJUST
[TXT ON SCR 1]
Detection level
adjustment: Text 1 on
dots
1 - 99 50
J SEGMENT: ADJUST
[TXT ON SCR 2]
Detection level
adjustment: Text 2 on
dots
1 - 99 50
K SEGMENT: ADJUST
[TXT ON SCR AREA]
Detection level
adjustment: Detection
area of text on dots
1 - 15 8
L SEGMENT: ADJUST
[HIGH LPI]
Detection level
adjustment: High line
number judgment
1 - 49 25
M SEGMENT: ADJUST
[BK]
Detection level
adjustment: No
chrome judgment
1 - 99 50
N SEGMENT: ADJUST
[CL]
Detection level
adjustment: Chrome
judgment
1 - 99 50
O SEGMENT: ADJUST
[TXT ON BG]
Detection level
adjustment: Text on
background
1 - 99 50
P SEGMENT: ADJUST
[SCR 1 HIGH]
Detection level
adjustment: High
density dots
1 - 49 25
Q SEGMENT: ADJUST
[SCR 1 MIDDLE]
Detection level
adjustment: Medium
density dots
1 - 49 25
R SEGMENT: ADJUST
[SCR 1 LOW]
Detection level
adjustment: Low
density dots
1 - 49 25
S SEGMENT: ADJUST
[SCR 2]
Detection level
adjustment: Dot 2
1 - 15 8
T SEGMENT: ADJUST
[SCR 3]
Detection level
adjustment: Dot 3
1 - 15 8
U SEGMENT: ADJUST
[LINE HALFTONE]
Detection level
adjustment: line
screen
1 - 49 25
Item/Display Content
Setting
range
Default
value
A SW_ACS ACS judgment reference
area select
0 - 1 1
B TEXT_IMAGE Text/Image judgment
priority level adjustment
0 - 6 3
C TEXT_BLANK Text/Blank judgment
priority level adjustment
0 - 6 4
D HT_LV Dot area judgment
threshold value
adjustment
0 - 6 1
E AE_AREA_LV Color AE judgment target
area adjustment
0 - 6 3
F AE_LV_CC AE background detection
division result
adjustment:
For color copy
0 - 8 4
G AE_LV_MC AE background detection
division result
adjustment:
For monochrome copy
0 - 8 4
H AE_LV_CS AE background detection
division result
adjustment:
For color scan
0 - 8 4
I AE_LV_MS AE background detection
division result
adjustment:
For monochrome scan
0 - 8 4
J AE_JUDGE
_LV_L_U
Color AE background
density threshold value
adjustment (lower limit)
0 - 4 0
Item/Display Content
Setting
range
Default
value
To Next Page
Loading...
