MX-3114N DISASSEMBLY AND ASSEMBLY 10 – 30
c. DV side seals F/R
1) Remove the DV side seals F/R.
When replacing the toner DV side seals F/R, attach a new one
to the reference.
Before attaching a new seal, be sure to remove foreign materi-
als or remained adhesive completely from the attachment sur-
face.
d. Toner filter
1) Remove the toner filter.
When attaching the toner filter, be sure filter is completely
seated.
E. OPC drum section
(1) OPC drum unit
a. Drum
1) Rotate the OPC drum drive gear in the arrow direction (clock-
wise) to release the drum shaft lock.
When locking or releasing the lock of the drum shaft, check the
direction of rotating the drum drive gear indicated on the drum
holder on the rear frame side.
!TTACHMENT REFERENCE !TTACHMENT REFERENCE
ECNEREFERTNEMHCATT!
ECNEREFERTNEMHCATT!
No. Name
1Drum
2 MC unit
3 Cleaning blade
4 Toner reception blade
5 Side seals F/R
To Next Page
Loading...
