Sharp MX-2314N Service Manual

MX-3114N ADJUSTMENTS AND SETTINGS 5 – 2
ADJ 10/
SET1
Color balance and density
adjustment
10D Copy / Image send / FAX image
quality adjustment (Individual
adjustment)
10D
(5)
Automatic monochrome (Copy/Scan/FAX) mode
document density scanning operation (exposure
operation) conditions setting
(Normally no need to set)
46-19
10D
(6)
Document low density image density reproduction
adjustment in the automatic monochrome (Copy/
Scan/FAX) mode (No need to adjust normally)
(Background density adjustment in the scanning
section)
46-32
10D
(7)
Copy/Scan low density image density adjustment
(for each mode) (No need to adjust normally)
46-63
10D
(8)
Color copy, text, line image reproduction
adjustment (edge gamma, density adjustment)
(Text, Map mode) (No need to adjust normally)
46-27
10D
(9)
Monochrome (Copy/Scan/FAX) mode color
document reproduction adjustment (No need to
adjust normally)
46-37
10D
(10)
Color copy mode dark area gradation (black
component quantity) adjustment (No need to
adjust normally)
46-38
10D
(11)
Color (Copy/Scan) mode sharpness adjustment
(No need to adjust normally)
46-60
10D
(12)
Copy high density image density reproduction
setting
(Normally unnecessary to the setting change)
46-23
10D
(13)
Copy color balance adjustment (Single color copy
mode) (No need to adjust normally)
46-25
10D
(14)
RSPF mode (Copy/Scan/FAX) density adjustment
(No need to adjust normally
46-9
10D
(15)
Automatic color balance adjustment by the user
(Copy color balance automatic adjustment
ENABLE setting and adjustment)
26-53
10D
(16)
Copy gamma, color balance adjustment for each
dither (Automatic adjustment)
46-54
10E Printer image quality adjustment
(Basic adjustment)
10E
(1)
Printer color balance adjustment
(Automatic adjustment)
67-24
10E
(2)
Printer color balance adjustment
(Manual adjustment)
67-25
10F Printer image quality adjustment
(Individual adjustment)
10F
(1)
Printer density adjustment (Low density section
density adjustment) (No need to adjust normally)
67-36
10F
(2)
Printer high density image density reproduction
setting (Supporting the high density section tone
gap) (No need to adjust normally)
67-34
10F
(3)
Printer gamma adjustment for each dither
(Automatic adjustment) (No need to adjust
normally) (Except for GDI printers)
67-54
10F
(4)
Automatic color balance adjustment by the
user(Printer color balance automatic adjustment
ENABLE setting and adjustment)
(Norma
lly unnecessary to the setting change)
26-53
ADJ 11 Paper size sensor adjustment 11A Manual paper feed tray paper size (width) sensor adjustment 40-2
11B RSPF paper feed tray document size (width) sensor adjustment 53-6
ADJ 12 Document size detection
adjustment
12A Document size sensor detection point adjustment 41-1
12B Adjust the sensitivity of the original size sensor 41-2
ADJ 13 Touch panel coordinate setting 65-1
ADJ 14 Fusing paper guide position adjustment
ADJ 15 Print image position, image
magnification ratio, void area,
off-center adjustment (Print
engine) (Manual adjustment)
15A Print image magnification ratio adjustment (main scanning direction) (Print engine)
(Manual adjustment)
50-10
15B Print image print area adjustment (Print engine) (Manual adjustment) 50-10/50/1
15C Print image off-center adjustment (Print engine) (Manual adjustment) 50-10
ADJ 16 Scan image magnification ratio
adjustment (Manual adjustment)
16A Scan image magnification ratio adjustment (main scanning direction) (Manual adjustment)
(Document table mode)
48-1
16B Scan image magnification ratio adjustment (sub scanning direction) (Manual adjustment)
(Document table mode)
48-1/48-5
16C Scan image magnification ratio adjustment (main scanning direction) (Manual adjustment)
(RSPF mode)
48-1
16D Scan image magnification ratio adjustment (sub scanning direction) (Manual adjustment)
(RSPF mode)
48-1
ADJ 17 Scan image off-center
adjustment (Manual adjustment)
17A Scan image off-center adjustment (Manual adjustment) (Document table mode) 50-12
17B Scan image off-center adjustment (Manual adjustment) (RSPF mode) 50-12/50-6
ADJ 18 Copy image position, image loss
adjustment (Manual adjustment)
18A Copy image position, image loss, void area adjustment (Manual adjustment)
(Document table mode)
50-1
18B Image scanning position adjustment (Manual adjustment) (RSPF mode) 53-8
18C Copy image position, image loss, void area adjustment (Manual adjustment) (RSPF mode) 50-6
ADJ 19 Finisher and punch unit adjustments (alignment, punch hole position, staple position) 3-10
Job No. Adjustment item list Simulation

Sharp MX-2314N Specifications

General

Print Technology	Laser
Print Speed	23 ppm
Print Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Copy Speed	23 cpm
Copy Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Duplex Printing	Yes
Connectivity	USB, Ethernet
Functions	Print, Copy, Scan, Fax
Paper Size	A3, A4, A5, B4, B5
Max Paper Size	A3
Original Size	A3