SIEB & MEYER SD2M User Manual

5.5 Technical Data
Note
In order to comply with the EMC Directive 2014/30/EU the device must be operated with
an external line filter. A list of suitable line filters is provided in the appendix (see chapter
D.3 “Line Filters by TDK & EPCOS Group”, page 117).
Device variant 03622xxxx 80AF 81BF 82AF 83BF
Output stage (switching frequency = 8 kHz)
Output power for RMS phase current [kVA]
120
(1)
240
(1)
145
(2)
345
(2)
Peak amplitude [A
p
] 300 600 300 707
Peak amplitude
at 0 Hz
[A
p
] 150 300 150 353.5
RMS value [A
rms
] 212 424 212 500
Continuous phase cur-
rent
(3)
(±3 %)
RMS value at
0 Hz
[A
rms
] 106 212 106 250
Peak amplitude [A
p
] 375 750 375 750
Peak amplitude
at 0 Hz
[A
p
] 187.5 375 187.5 375
RMS value [A
rms
] 265 530 265 530
Peak phase current
(3)
(±3 %)
RMS value at
0 Hz
[A
rms
] 132.5 265 132.5 265
Max. time for peak current [s] 60 60 60 60
Derating frequency [Hz] 30 30 30 30
Max. output frequency [Hz] 1000 1000 1000 1000
Output frequency stability [%] ≤ 0.2 ≤ 0.2 ≤ 0.2 ≤ 0.2
Output stage (switching frequency = 16 kHz)
Output power for RMS phase current [kVA]
120
(1)
240
(1)
145
(2)
293
(2)
Peak amplitude [A
p
] 300 600 300 600
Peak amplitude
at 0 Hz
[A
p
] 150 300 150 300
RMS value [A
rms
] 212 424 212 424
Continuous phase cur-
rent
(3)
(±3 %)
RMS value at
0 Hz
[A
rms
] 106 212 106 212
Peak amplitude [A
p
] 375 750 375 750
Peak amplitude
at 0 Hz
[A
p
] 187.5 375 187.5 375
RMS value [A
rms
] 265 530 265 530
Peak phase current
(3)
(±3 %)
RMS value at
0 Hz
[A
rms
] 132.5 265 132.5 265
Max. time for peak current [s] 60 60 60 60
Derating frequency [Hz] 30 30 30 30
Max. output frequency [Hz] 2000 2000 2000 2000
Output frequency stability [%] ≤ 0.2 ≤ 0.2 ≤ 0.2 ≤ 0.2
Mains supply
Number of phases 3 3 – –
Minimum [V
AC
] 200 400 – –AC voltage (±10 %)
Maximum [V
AC
] 480 480 – –
Minimum [Hz] 50 50 – –Frequency (±2 Hz)
Maximum [Hz] 60 60 – –
Mains phase current at rated power and
mains voltage of 400 V
rms
[A
rms
] 180 360 – –
Short circuit current rating (SCCR) [kA] 10 18 – –
External power supply
Current at rated power and 600 V [A
rms
] – –
260
(4)
600
(4)
25Drive System SD2M - Hardware Description 036228xxF
Drive Amplifier SD2M

SIEB & MEYER SD2M Specifications

General

Brand	SIEB & MEYER
Model	SD2M
Category	DC Drives
Language	English