© 2008 Siemens Energy & Automation, Inc. All Rights Reserved
ACCESS 9340 and 9360 Meters PMCM-9340D-0208
Appendix A—Meter Register List 2/2008
EN–142
3034 Present Date/Time —
Table A–1
on page 121
Table A–1
on page 121
3039 Last Unit Restart —
Table A–1
on page 121
Table A–1
on page 121
Last unit restart time
3043
Number of Metering
System Restarts
— 1.0 0 – 32,767
3044
Number of Control
Power Failures
— 1.0 0 – 32,767
3045
Control Power Failure
Date/Time
—
Table A–1
on page 121
Table A–1
on page 121
Date/Time of last control power failure
3049
Cause of Last Meter
Reset
— — 1 – 20
1 = shutdown & soft reset (restart F/W)
2 = shutdown & hard reset (load from flash and
run)
3 = shutdown & hard reset and set memory to
default
10 = shutdown with no reset (used by DLF)
12 = already shutdown, hard reset only (used
by DLF)
20 = Power failure
3050 Self-Test Results — —
0x0000 –
0xFFFF
0 = Normal; 1 = Error
Bit 00 = Is set to “1” if any failure occurs
Bit 01 = RTC failure
Bit 02 = Reserved
Bit 03 = Reserved
Bit 04 = Reserved
Bit 05 = Metering Collection overrun failure
Bit 06 = Reserved
Bit 07 = Metering Process 1.0 overrun failure
Bit 08 = Reserved
Bit 09 = Reserved
Bit 10 = Reserved
Bit 11 = Reserved
Bit 12 = Reserved
Bit 13 = Reserved
Bit 14 = Reserved
Bit 15 = Reserved
Table A–3: Abbreviated Register List
Reg Name Scale Units Range Notes
To Next Page
Loading...
