© 2008 Siemens Energy & Automation, Inc. All Rights Reserved
ACCESS 9340 and 9360 Meters PMCM-9340D-0208
Appendix A—Meter Register List 2/2008
EN–162
Base +22
IO Point Diagnostic
Bitmap
— — 0x0000 – 0x000F
0 = OK, 1 = Error
Bit 00 = I/O Point diagnostic summary
Bit 01 = Configuration invalid – default value
used
Bit 02 = Discrete output energy pulse – time
between
transitions exceeds 30 seconds
Bit 03 = Discrete output energy pulse – time
between
transitions limited to 20 milliseconds
Base +23 Reserved — — — Reserved for future development
Base +24 Reserved — — — Reserved for future development
Base +25
Discrete Output On/Off
Status
— — 0 – 1
0 = Off
1 = On
Base +26 Count — — 0 – 99,999,999
Number of times output has transitioned from
OFF to ON
Base +28 On Time — Seconds 0 – 99,999,999 Duration that discrete output has been ON
Table A–4: Registers for Inputs and Outputs
Reg Name Scale Units Range Notes
To Next Page
Loading...
