Siemens SENTRON ATC6500 - Page 130

Connection
7.6 Connection of 3WL air circuit breakers, FS I - III
3KC ATC6500 transfer control device
128 Manual, 05/2019, L1V30538268002A-01
Note
Implementation of the power supply
More information on implementing the power supply of the ATC6500 vi
a the inputs 53, 54
and
/ or the inputs 26, 27 can be found in chapter Connection of the power supply (Page 83).
Note
Mechanical interlock
A m
echanical interlock of the circuit breakers can be applied in addition.
Note
Expansion modules
For additional functions, expansion modules with inputs/outputs can be attached if necessary
(see chapter
Expansion modules (Page 209)).
You can find more information on the technical specifications of the circuit breaker in the
Operating Instructions of the 3WL air circuit breaker
(https://support.industry.siemens.com/cs/ww/en/view/8912465
).
Terminal
Parameter code
Settings
-
P02.01 System configuration
A: 2S-0T
- P02.22 Management of the tie breaker
(TB)
OFF
-
P08.01 Type of breaker
Breaker pulse or breaker continuous
40 (INP1)
P12.1.01 Function of the input INP1
Source 1 breaker closed (feedback 1)
41 (INP2)
P12.2.01 Function of the input INP2
Source 2 breaker closed (feedback 2)
42 (INP3)
P12.3.01 Function of the input INP3
Source 1 breaker protection (Trip 1)
43 (INP4)
P12.4.01 Function of the input INP4
Source 2 breaker protection (Trip 2)
55 (OUT1)
P13.1.01 Function of the output OUT1
Open Source 1 breaker
57 (OUT2)
P13.2.01 Function of the output OUT2
Close Source 1 breaker
58 (OUT3)
P13.3.01 Function of the output OUT3
Open Source 2 breaker
60 (OUT4)
P13.4.01 Function of the output OUT4
Close Source 2 breaker