Siemens SENTRON ATC6500 - Expansion Module 2 DI 2 DO - 3 KC9000-8 TL62

Accessories
11.1 Expansion modules
3KC ATC6500 transfer control device
Manual, 05/2019, L1V30538268002A-01
215
Certifications and approvals
The following standards are complied with:
cULus
Complies with standards IEC / EN 61010-1
IEC / EN 61000-6-2
IEC / EN 61000-6-3
UL 508
CSA C22.2-N°14
UL marking Four solid state outputs:
• 30 V AC, 55 mA general use
• 40 V AC, 55 mA general use
Use 60° C / 75 °C copper (CU) conductor only
AWG Range: 28 - 14 AWG stranded or solid
Field wiring terminals tightening torque: 1.7 lbf-in
11.1.5 Expansion module 2DI 2DO - 3KC9000-8TL62
Description
The expansion module 2DI 2DO (article number 3KC9000-8TL62) contains 2 opto-isolated
digital inputs and 2 solid-state relay (SSR) outputs.
In addition, a DC source (24 V / 1 W) is attached, in order to supply power to various types of
input.
These include:
● NPN, PNP, PUSH PULL
● Active sensors with digital outputs
Connection drawings
Design of the terminals
Maximum current for supplying sensors and tolerance graph
You can find more information in chapter Expansion module 4DI - 3KC9000-8TL60
(Page 210)