3KC ATC6500 transfer control device
Manual, 05/2019, L1V30538268002A-01
51
The following chapter contains information on:
● Basic functions
● Advanced functions
5.1 Basic functions
5.1.1 Setting the real-time clock
The virtual calendar clock of the ATC6500 must be set when the device is first
commissioned. You can select whether the clock is to be reset after each device restart. This
can be set using parameter P01.02 (refer to chapter P01 Settings (Page 161)). The real-time
clock is stored for up to 14 days by means of a memory capacitor.
The real-time clock of the ATC6500 can also be reset during operation.
Procedure
1. Select the display page Date / Time.
2. Press the ◄ and ► keys simultaneously to activate the adjustment of the date / time.
The value to be adjusted is then highlighted.
3. Change the setting.
Using the ◄ and ► keys you can jump back and forward between the
hours / minutes / seconds or between month / day / year.
The individual values can be changed using the ▲ or ▼ keys.
4. Confirm the setting by pressing the ✓ key.
To Next Page
Loading...
