Connection
7.2 General connection drawings
3KC ATC6500 transfer control device
90 Manual, 05/2019, L1V30538268002A-01
7.2 General connection drawings
7.2.1 Transfer between 2 sources, with 2 breakers
The schematic diagram below shows the setup of a transfer between 2 breakers. For this
purpose, the application 2S- 0T must be used
(see chapter Application A: 2S – 0T
(Page 21)).
F1 / F2 Source fuse
Mechanical interlock
To Next Page
Loading...
