Transfer
12.2 Transfer sequence
3KC ATC6500 transfer control device
Manual, 05/2019, L1V30538268002A-01
229
12.2 Transfer sequence
12.2.1 Transfer sequence for application A: 2S - 0T
If Source 1 is regarded as the priority source, a transfer to the alternative source (Source 2)
takes place and an automatic return to the priority source according to the diagram below:
In addition to the various delay times for limit violation, the transfer is also influenced by
the interlock times under parameter P07.n.02.
An automatic return can be prevented by parameter P08.04 or a digital input.
See also
Application A: 2S – 0T (Page 21)
Parameters (Page 160)
To Next Page
Loading...
