3KC ATC6500 transfer control device
Manual, 05/2019, L1V30538268002A-01
79
The following chapter contains information on:
● Dimensions for the door cutout
● Installation of the ATC6500
Additional information can be found in the Operating instructions for 3KC ATC6500 transfer
control device (https://support.industry.siemens.com/cs/ww/en/view/109764908
).
6.1 Dimensions for the door cutout
The ATC6500 is intended for door mounting.
When correctly installed and with simultaneous use of the IP protective seal 3KC9000-
8TL68, IP65 protection is achieved at the front.
The door cutout for the ATC6500 must have the following dimensions:
To Next Page
Loading...
