Siemens SENTRON ATC6500 - Technical Specifications Ethernet

Accessories
11.1 Expansion modules
3KC ATC6500 transfer control device
224 Manual, 05/2019, L1V30538268002A-01
11.1.12 Technical Specifications Ethernet
Power supply
Supply voltage
5 V DC (supplied through the ATC6500)
Current consumption (max.)
250 mA
Power loss (max.)
1.25 W
Ethernet interface
Network interface
RJ45 Ethernet 10BASE-T or 100BASE-TX
Compatibility
Version 2.0 / IEEE802.3
Type of connection
RJ45
Insulation
Impulse withstand voltage U
imp
4 kV
Operating frequency impulse withstand voltage
2 kV
Ambient conditions
Operating temperature
-20 … +60 °C
Storage temperature
-30 … +80 °C
Relative humidity
< 80 % (IEC / EN 60068-2-70)
Maximum degree of pollution
2
Overvoltage category
3
Altitude of environment (max.)
≤ 2000 m
Enclosure
Enclosure material
Polyamide RAL7035
Degree of protection
IP20
Weight
60 g
Certifications and approvals
The following standards are complied with: cULus, EAC
Complies with standards IEC / EN 61010-1
IEC / EN 61000-6-2
IEC / EN 61000-6-3
UL 508
CSA C22.2-N°14