General information
2.1 Features of the ATC6500 transfer control device
3KC ATC6500 transfer control device
16 Manual, 05/2019, L1V30538268002A-01
Metering functions
The ATC6500 permits voltage measurement between L-L, between L-N, and between L-L
and L-N simultaneously. The following measurements can be made:
● Phase sequence and phase failure
● Minimum and maximum voltage
● Voltage unbalance
● Minimum and maximum frequency
● Phase displacement angle cos phi
● Voltage and frequency deviation of the two sources
● Deviation of the phase displacement angle cos phi of the two sources
Area of application
The ATC6500 transfer control device can be used in conjunction with Siemens switching
devices in areas in which a continuous power supply needs to be ensured.
The device is used in the following areas:
● Service sector
– Data centers (data and server rooms)
● Shopping malls
● Infrastructure
– Highways (e.g. tunnels)
– Hotels
● Industry
– Production lines in continuous operation
– Engine rooms
– Pumps
To Next Page
Loading...
