Functions
5.1 Basic functions
3KC ATC6500 transfer control device
54 Manual, 05/2019, L1V30538268002A-01
After you have clicked on the symbol, the following window appears:
Procedure for password entry
1. Change the value of the selected digit with the ▲ and ▼ keys.
2. Move from digit to digit using the ◄ and ► keys.
3. Enter all the digits of the password.
4. Finally, position the cursor on the password symbol and wait.
If the password that you have entered corresponds with the password of the user level or
the password of the advanced level, the appropriate enabling message is displayed.
5. The ✓ key is used to terminate the password entry and close the window.
Access to the device remains open until:
● the device is switched off
● the device is reset (after closing the Setup menu)
● more than two minutes have passed without a key being pressed (not adjustable)
To Next Page
Loading...
