Siemens SIMATIC ET 200iSP

Technical speci󹪝cations
Module-speci󹪝c data
Number of terminals 2 x 4
Cable cross-sections 0.2 mm to 2.0 mm²
*
Safety data
U = AC 60 V or DC 60 V
I = 2 A
For details, see certi󹪝cate IECEx KEM 07.0060
https://www.iecex.com (https://www.iecex.com)
INMETRO UL-BR 12.0079
https://support.industry.siemens.com (https://support.industry.siemens.com)
*
See "Wiring Rules for the ET 200iSP (Page 125)".
Note
Make sure to separate intrinsically safe cables from non-intrinsically safe cables.
Approvals
ATEX II 2 G and I M2
Ex db eb ib IIC T4 Gb
Ex db eb ib I Mb
KEMA 07 ATEX 0205
0344
IECEx IECEx KEM 07.0060
INMETRO
R
#3
0$1
BR-Ex db eb ib IIC T4 Gb
BR-Ex db eb ib I Mb
FM Class I, Zone 1, AEx db eb ib IIC T4;
Ex db eb ib IIC T4
Class I, DIV. 2, GP A,B,C,D T4
Class II, III, GP E,F,G
cULus
R
-*45&%&
Process Cont. Eq. for Use in HAZ.LOC.
Class I, Zone 1, AEx db eb ib IIC T4;
Ex db eb ib IIC T4
Class I, DIV. 2, GP A,B,C,D T4
CCC Ex d e ib IIC T4 Gb
UKCA DEKRA 21UKEX0031
Terminal modules
10.6 Terminal module TM-RM/RM
ET 200iSP
Operating Instructions, 11/2022, A5E00247483-AK 267