Siemens SIMATIC ET 200iSP - Page 285

Technical speci󹪝cations
Article number 6ES7152-1AA00-0AB0
General information
Product function
• Isochronous mode
No
Input current
from supply voltage L+, max. 30 mA
Power loss
Power loss, typ. 0.5 W
Time stamping
Description for each digital input, digital input module, total ET
200iS
Accuracy 20 ms
Number of stampable digital inputs, max. 64; for accuracy class 20 ms
Time format RFC 1119 Internet (ISP)
Time resolution 1 ms
Time interval for transmitting the message buf‐
fer if a message is present
1 000 ms
Time stamp on signal change rising / falling edge as signal entering or exiting
Interfaces
Interfaces/bus type RS 485
Transmission rate, max. 1.5 Mbit/s; 9,6 / 19,2 / 45,45 / 93,75 / 187,5 / 500
kbit/s; 1,5 Mbit/s
Protocols
PROFIBUS DP Yes
PROFIBUS DP
Services
– SYNC capability
Yes
– FREEZE capability
Yes
– Direct data exchange (slave-to-slave com‐
munication)
Yes
Interrupts/diagnostics/status information
Alarms Yes
Diagnostics function Yes
Alarms
• acyclic function, interrupts
Yes
• acyclic function, parameters
Yes
Diagnostics indication LED
• Bus fault BF (red)
Yes
• Group error SF (red)
Yes
• Monitoring 24 V voltage supply ON (green)
Yes
Potential separation
between supply voltage and electronics Yes
Standards, approvals, certi󹪝cates
Network interface module
12.2 PROFIBUS interface module IM 152-1DP
ET 200iSP
Operating Instructions, 11/2022, A5E00247483-AK 285