Siemens SIMATIC ET 200iSP

Technical speci󹪝cations
• for "0" to "1" *
7 ms
• for "1" to "0" **
3 ms
Wiring two outputs in parallel No
Switching frequency
• with resistive load
100 Hz
• with inductive load
2 Hz
* Response time of the relay
** Release time of the relay
Approvals
ATEX II 2 G(1) GD and I M2
Ex eb ib mb IIC T4 Gb
Ex eb ib mb I Mb
KEMA 07 ATEX 0180
0344
IECEx IECEx KEM 07.0059
INMETRO
R
#3
0$1
BR-Ex eb ib mb IIC T4 Gb;
BR-Ex eb ib mb I Mb
FM Class I, Zone 1, AEx eb ib mb IIC T4;
Ex eb ib mb IIC T4
NI, Class I, DIV. 2, GP A,B,C,D T4
Class II, III, GP E, F, G
cULus
R
-*45&%&
Process Cont. Eq. for Use in HAZ.LOC.
Class I, Zone 1, AEx eb ib mb IIC T4;
Ex eb ib mb IIC T4
Class I, DIV. 2, GP. A,B,C,D T4
CCC Ex e ib mb IIC T4 Gb
UKCA DEKRA 21UKEX0025
Switching capacity and service life of contacts
With an external protective circuit, the contacts will last longer than speci󹪝ed in the following
table.
Digital electronic modules
13.3 Digital electronic module 2 DO Relay UC60V/2A
ET 200iSP
Operating Instructions, 11/2022, A5E00247483-AK 333