Siemens SIMATIC ET 200iSP User Manual

Technical speci󹪝cations
U
o
= 27.6 V
I
o
= 91 mA
P
o
= 0.63 W
C
o
= 83 μF
L
o
= 3 mH
For additional C
o
/ L
o
combinations, see certi󹪝cate IECEx KEM 05.0012
https://www.iecex.com (https://www.iecex.com)
KEMA 04 ATEX1250 INMETRO UL-BR 12.0070
https://support.industry.siemens.com (https://support.industry.siemens.com)
Actuator selection data
Output ranges (rated values)
• Current
0 to 20 mA
4 to 20 mA
1
Wire break depends on current of the load
Approvals
ATEX II 2 G(1) GD and I M2
Ex ib [ia Ga] IIC T4 Gb
Ex ib [ia IIIC Da] IIC T4 Gb
Ex ib [ia/] I Mb
KEMA 04 ATEX 1250
0344
IECEx IECEx KEM 05.0012
INMETRO
R
#3
0$1
BR-Ex ib [ia Ga] IIC T4 Gb
BR-Ex ib [ia IIIC Da] IIC T4 Gb
BR-Ex ib [ia] I Mb
FM Class I, Zone 1, AEx ib [ia] IIC T4;
Ex ib [ia] IIC T4
NI, Class I, DIV. 2, GP. A,B,C,D T4
AIS, Class I, DIV. 1, GP. A,B,C,D
Class II, III, GP. E,F,G
cULus
R
-*45&%&
Process Cont. Eq. for Use in HAZ.LOC.
Class I, Zone 1, AEx ib [ia] IIC T4
Ex ib [ia] IIC T4
ASSOC APP. CL. I, DIV.2, GP. A,B,C,D
PROVIDING INT. SAFE CIRCUITS FOR
CL. I, GP. A,B,C,D;
CL. II, III, GP. E,F,G
CCC Ex ib [ia Ga] IIC T4 Gb
Ex ib [iaD] IIC T4 Gb
UKCA DEKRA 21UKEX0091
Analog electronic modules
14.6 Analog electronic module 4 AO I HART
ET 200iSP
374 Operating Instructions, 11/2022, A5E00247483-AK

Siemens SIMATIC ET 200iSP Specifications

General

Brand	Siemens
Model	SIMATIC ET 200iSP
Category	I/O Systems
Language	English