Siemens SIMATIC ET 200iSP

Approvals
ATEX II 2 G and I M2
Ex ib IIC T4 Gb
Ex ib I Mb
KEMA 06 ATEX 0086
0344
IECEx IECEx KEM 06.0026
INMETRO
R
#3
0$1
BR-Ex ib IIC T4 Gb
BR-Ex ib I Mb
FM Class I, Zone 1, AEx ib IIC T4;
Ex ib IIC T4
NI, Class I, DIV. 2, GP A,B,C,D T4
Class II, III, GP E,F,G
cULus
R
-*45&%&
Process Cont. Eq. for Use in HAZ.LOC.
Class I, Zone 1, AEx ib IIC T4
Ex ib IIC T4
Class I, DIV. 2, GP. A,B,C,D T4
CCC Ex ib IIC T4 Gb
UKCA DEKRA 21UKEX0028
Parameters
Parameter Range of values Default Applicability
Operating mode
• Disabled
• write/ read
• write/ read neg.
• toggle 0.1 Hz
• toggle 0.5 Hz
• toggle 1 Hz
• toggle 2 Hz
write/ read Module
Response to CPU/
Master STOP
• Keep last value
• set to 00
H
• set to FF
H
Keep last value Module
Parameter description: Operating mode
Disabled: A value that you write to the output byte is not transferred to the input byte.
write/ read: A value that you write to the output byte is transferred to the input byte.
write/ read neg.: A value that you write to the output byte is inverted and transferred to the
input byte.
Other modules
15.2 Watchdog module
ET 200iSP
416 Operating Instructions, 11/2022, A5E00247483-AK