toggle 0.1 Hz; toggle 0.5 Hz; toggle 1 Hz; toggle 2 Hz: The bit 0 (see Address space of the
inputs and outputs (Page 435)) in the input byte of the PII toggles (ashes) with the specied
frequency.
Parameter description: Response to CPU/ master STOP
Keep last value: The last value in the output byte of the PIQ is retained.
Set to 00
H
: The value in the output byte of the PIQ is set to 00
H
.
Set to FF
H
: The value in the output byte of the PIQ is set to FF
H
.
Other modules
15.2 Watchdog module
ET 200iSP
Operating Instructions, 11/2022, A5E00247483-AK 417
To Next Page
Loading...
Need help?
General
