Siemens SIMATIC ET 200iSP User Manual

Table A-10 Network components for ET 200iSP
Designation Quantity Article number Required for the con󹪝guration var‐
iant
PROFINET IO PROFIBUS DP
Media converter RJ45/FOC (e.g. "Optical connec‐
tion (https://
support.industry.siemens.com/cs/ww/en/view/
109761426)")
1 unit Contact your Siemens
representative Sie‐
mens.
YES NO
Ethernet cable with RJ45 connector (e.g. "Passive
network components (https://
support.industry.siemens.com/cs/ww/en/view/
84922825)")
1 unit YES NO
LC cable (e.g. "Passive network components
(https://
support.industry.siemens.com/cs/ww/en/view/
84922825)")
1 unit YES NO
RS 485-IS coupler 1 unit 6ES7972-0AC80-0XA0 NO YES
PROFIBUS bus connector RS 485-IS, with inclined
cable outlet, reversible active bus terminating re‐
sistor
1 unit 6ES7972-0DA60-0XA0 NO YES
Bus cable for PROFIBUS Sold in
meters
6XV1830-0EH10 NO YES
Bus cable for PROFIBUS RS 485 IS, blue (PB FC
Standard Cable IS GP)
Sold in
meters
6XV1831-2A NO YES
Automation Systems Principles of Explosion Protection manual
Manual Contents
Automation systems basics of ex‐
plosion protection as download
from Technical Support: Techni‐
cal Support (https://
www.siemens.com/automation/
service)
for example
• Current explosion protection standards and guidelines
• Explanation of protective measures and marking of equipment
• Notes on setup, operation and maintenance of equipment for
hazardous areas
Product information RS 485-IS coupler
Product information Contents
RS 485-IS coupler as download
from Technical Support: Techni‐
cal Support (https://
www.siemens.com/automation/
service)
for example
• Properties
• Installation
• Wiring
• Technical speci󹪝cations
Appendix
A.1 Article numbers
ET 200iSP
424 Operating Instructions, 11/2022, A5E00247483-AK

Siemens SIMATIC ET 200iSP Specifications

General

Brand	Siemens
Model	SIMATIC ET 200iSP
Category	I/O Systems
Language	English