Siemens SIMATIC ET 200SP System Manual

Basics of program execution
8.2 Asynchronous instructions
Distributed I/O system
System Manual, 09/2019, A5E03576849-AJ
153
Table 8- 8 Maximum number of concurrently running jobs for asynchronous instructions for OPC UA
OPC_UA
CPU 1510SP-1 PN
CPU 1510SP F-1 PN
CPU 1512SP-1 PN
CPU 1512SP F-1 PN
OPC_UA_Connect
10
OPC_UA_Disconnect
10
OPC_UA_NamespaceGetIndexList
10
OPC_UA_NodeGetHandleList 10
OPC_UA_NodeReleaseHandleList
10
OPC_UA_TranslatePathList 10
OPC_UA_ReadList
10
OPC_UA_WriteList
10
OPC_UA_MethodGetHandleList
10
OPC_UA_MethodReleaseHandleLi
st
10
OPC_UA_MethodCall
10
OPC_UA_ServerMethodPre
10
OPC_UA_ServerMethodPost
10
OPC_UA_ConnectionGetStatus
10

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C