Siemens SIMATIC ET 200SP System Manual

Basics of program execution
8.2 Asynchronous instructions
Distributed I/O system
154 System Manual, 09/2019, A5E03576849-AJ
Technology: maximum number of concurrently running jobs
Table 8- 9 Maximum number of concurrently running jobs for asynchronous instructions for technology. The instructions
for technology use a common pool of resources.
Technology
CPU 1510SP-1 PN
CPU 1510SP F-1 PN
CPU 1512SP-1 PN
CPU 1512SP F-1 PN
Motion Control
MC_Power
MC_Reset
MC_Home
MC_Halt
MC_MoveAbsolute
MC_MoveRelative
MC_MoveVelocity
MC_MoveJog
MC_GearIn
MC_MoveSuperimposed
MC_MeasuringInput
MC_MeasuringInputCyclic
MC_AbortMeasuringInput
MC_OutputCam
MC_CamTrack
MC_TorqueLimiting
300
Additional information
You can find additional information on block parameter assignment in the STEP 7 online
help.

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C