Parameters
4.3 Monitoring functions
SIMOCODE pro - Parameterize
Operating Manual, 04/2017, A5E40507630002A/RS-AA/001
135
Current limit monitoring
4.3.2.1
Description of functions of current limit monitoring
Monitoring of current limits is used for process monitoring independent of overload
protection.
SIMOCODE pro supports two-phase monitoring of the motor current for freely selectable
upper and lower current limit values. The response of SIMOCODE pro can be freely
configured and delayed if it reaches a prewarning or trip level.
The motor current is measured using current measuring modules or the current / voltage
measuring modules.
Figure 4-33 "Current Limits" function block
To Next Page
Loading...
