Parameters
4.4 Outputs
SIMOCODE pro - Parameterize
Operating Manual, 04/2017, A5E40507630002A/RS-AA/001
161
Overview of outputs
Description
SIMOCODE pro has various outputs. These are represented by different function blocks in
SIMOCODE pro. They are the external SIMOCODE pro interfaces. Within SIMOCODE pro,
the outputs are represented as plugs on the corresponding function blocks and can be
assigned to any functions or events via connections.
Outputs include:
● Output terminals , located on the outside of basic unit, digital modules, and on the
analog module
● LEDs on the operator panel for visualizing the operating state or different statuses
● Outputs to PROFIBUS DP (cyclic and acyclic).
The following schematic shows a general representation of the various types of output:
Figure 4-43 General representation of the various output types
To Next Page
Loading...
